Ikegami UHL-43 Operation Manual page 43

Menu Item
DATE(YY/MM/DD) （ E ）
TIME （ E ）
MAIN MENU CHAR(E)
■ ⑬ INFORMATION
Menu Item
WARNING
― DC INPUT
― TEMP
― FAN
― MEM BATT
WORKING TIME
SUB WORKING TIME
ETHERNET
― IP ADDRESS
― SUBNET MASK
― DEFAULT GATE WAY
― SPEED/DUPLEX
― MAC ADDRESS
FIRMWARE VERSION
― CAMERA
― SOFTWARE
― CHECK SUM
― P_PROC
― P_MPU
― VF
― SOFTWARE
― FPGA
HARDWARE VERSION
― P_PROC
― P_MPU
― P_AXII_T
― P_AXII_B
― VF
SERIAL NUMBER
MODULE SW
KEY DATA
― 4K FORMAT
Initial
Setting value
setting
--- YY / MM / DD
--- HH ： MM ： SS
DISABLE ENABLE, DISABLE
Initial
Setting value
setting
OK, NG(Information
OK
display)
OK, NG(Information
OK
display)
OK, NG(Information
OK
display)
OK, NG(Information
OK
display)
****.*H
---
(Information display)
****.*H
--- (Information display)
RESET
(Information display)
(Information display)
(Information display)
(Information display)
(Information display)
STRB6001V**.**.**
---
(Information display)
--- (Information display)
---
(Information display)
---
--- (Information display)
--- (Information display)
--- (Information display)
--- (Information display)
--- (Information display)
--- (Information display)
--- (Information display)
--- (Information display)
--- (Information display)
--- (Information display)
UHL-43 2005 VER1 (E)
5 Camera Setting and Adjustment
Description, Remarks
Sets the date and time for saving files to a USB memory.
Sets the date and time for saving files to a USB memory.
Permits menu display on MAIN Video output.
Description, Remarks
Displays the status of the DC input.
Displays the status of the camera's internal temperature.
Displays the status of the FAN.
Displays the status of the memory battery.
Displays the total accumulated operation time of the camera up to the present.
Displays the cumulative operating time of the camera up to the current time.
Users can reset arbitrarily unlike "WORKING TIME".
Displays the setting values of ETHERNET.
Displays the software version of the main unit.
Displays the software checksum of the main unit.
Displays the version of FPGA.
Displays the software version of VF.
Displays the FPGA version.
Displays the version information of the module PCB.
Displays the serial number of the camera.
Displays the setting status of dip switches on the PCB.
<< SYSTEM continued >>
33