Table of Contents
Advertisement
HOW TO READ THE OPERATION MANUAL
HOW TO READ THE OPERATION MANUAL
HOW TO READ THE OPERATION MANUAL
- - -
This page explains general notes on reading the UHL-43 Operation Manual, and the symbols and notations used in the manual.
Notes on the Manual
- This manual is written for readers with a basic knowledge of handling broadcast cameras.
- The contents of this manual are subject to change without notice in the future.
- - -
Symbols
The symbols used in this manual are as follows:
CAUTION:
Things you have to be careful during operation. Be sure to read.
Note:
Supplementary information or guidance
Reference:
Sections where related information is available
- - -
Notations
The following notations are used in this manual.
This product, Camera
Indicates UHL-43.
OCP
Basically indicates OCP-300 Operation Control Panel.
MCP
Basically indicates MCP-300 Maintenance Control Panel.
Indicates the items enclosed by double quotes (" ") are to be selected
" " - " " - " "
4K indicates the video outputs with active image area of 3840 x 2160
4K
or 4096 x 2160. In this document, 4K indicates the 3840 x 2160 output.
Signals that comply with SMPTE 292 1.5Gb/s Signal/Data Serial
HD (SDI)
Interface 1280×720, 1920 x 1080.
Signals that comply with SMPTE 424/425 3Gb/s Signal/Data Serial
3G (SDI)
Interface 1920×1080 (Level-A/B).
Quad Link
A method to construct a 4K image with 4 links.
- - -
Illustrations and Displays
The illustrations and displays in the text are provided for explanation and may be slightly different from the actual equipment or
image.
- - -
Related Manuals
Please refer to Operation Manual and Maintenance Manual of each product.
vi
UHL-43 2005 VER1 (E)
Advertisement
Table of Contents
