Ikegami UHL-43 Operation Manual page 29

Menu Item
FOCUS ASSIST WINDOW
― ASSIST AREA
― TRIGGER
― AREA ON/OFF SW
― VF VIDEO MAG.
― ASSIST DATA
― ASSIST DATA SETTING
― SW ACTION
― AREA DISP TIME
― AREA SIZE
― AREA LEVEL
― AREA COLOR
― AREA MARKER
EDGE BOOST
―
LEVEL
― EDGE COLOR
― STORE DATA
Initial
Setting value
setting
TRIGGER TRIGGER ON,
ON ALWAYS ON, OFF
FOCUS, FOCUS/ZOOM,
FOCUS
LENS VTR
NONE LENS VTR, NONE
UNLINK LINK, UNLINK
NO.1 N0.1 to N0.4
ALTERNATE,
ALTERNATE
MOMENTARY
0.0S to 5.0S
1.0S
(0.5 sec interval)
15 1 to 100
MONO MONO, COLOR, NEGA
OFF ON, OFF
55 1 to 100
MONO, CYAN,
MONO MAGENTA, YELLOW,
GREEN, RED, BLUE
---
N0.1 to N0.4
UHL-43 2005 VER1 (E)
5 Camera Setting and Adjustment
Description, Remarks
Sets the focus assist area display.
Select TRIGGER ON if you wish to display with the trigger of lens operation,
etc.
Trigger to display the focus assist area.
This setting is used when TRIGGER ON is selected.
Selects the switch to turn ON/OFF the focus assist area.
Sets whether to send control signals of VF VIDEO MAG function to VF or not.
Selects the ASSIST DATA compiled in the ASSIST DATA SETTING menu.
If the trigger has been assigned to the LENS VTR SW, sets whether it is
momentary operation or alternate operation.
Sets the time from trigger detection until the focus assist area is erased.
Sets the focus assist area range.
If set to "100", it is the entire screen domain.
Sets the image level of the focus assist area.
Sets whether the focus assist area image should be color, monochrome or
negative.
Sets whether the focus assist area frame marker is displayed nor not.
Sets the boost level of the edge signal.
Sets the color of the edge signal. 。
The contents set in the ASSIST DATA SETTING menu are stored as ASSIST
DATA. Select the numbers you wish to store from No. 1 to No. 4 and write over
the present data to store them.
<< FOCUS ASSIST continued >>
19