Ikegami UHL-43 Operation Manual page 37

Menu Item
MATRIX USER2 DATA SET （ E ）
― BASE COLOR
― R-G
― R-B
― G-R
― G-B
― B-R
― B-G
― DATA SAVE
― TRANSFER MATRIX
OPTICAL ABERRATION CORR. （ E ）
― CORRECTION
― CORR. LEVEL R
― CORR. LEVEL B
― OAC GUIDE MARK
Initial
Setting value
setting
OFF, BT.709, SMPTE,
USER2 EBU,
BT.2020, USER1, USER2
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
0.0 -100 to +100
--- READY
BT.709 BT.709, BT.2020
ENABLE,
ENABLE DISABLE
0 -10 to 10
0 -10 to 10
ON ON, OFF
UHL-43 2005 VER1 (E)
5 Camera Setting and Adjustment
<< VIDEO ADJUSTMENT continued >>
Description, Remarks
Sets the preset (USER2) of color matrix.
ON : Sets the preset data.
OFF : Does not set the preset data.
Sets the matrix of R-G.
Sets the matrix of R-B.
Sets the matrix of G-R.
Sets the matrix of G-B.
Sets the matrix of B-R.
Sets the matrix of B-G.
READY : Normal status
PUSH SET ---> CLR : Clears the preset data.
CANCEL : Exit "DATA CLEAR" without clearing the settings.
Sets the transfer matrix.
Switches between Enable/Disable of aberration correction.
This setting is saved when the power is turned off.
Therefore, set it to "DISABLE" if aberration correction is not used.
Changes the intensity of the correction.
Changes the intensity of the correction.
Sets whether a character display indicator is shown on the VF or not
when the aberration correction value is not properly received from the
serial lens.
27