Ikegami UHL-43 Operation Manual page 28

5 Camera Setting and Adjustment
■ ③ FOCUS ASSIST
Menu Item
VF PEAKING[VF]
― PEAKING [VF]
― PEAKING MODE [VF]
― PEAKING WIDTH [VF]
― NOISE SUP [VF]
PEAKING UP [VF]
―
― ZOOMUP PEAKING [VF]
― ZOOMUP PEAK-MAX [VF]
― ZOOMUP PEAK-MIN [VF]
― COLOR PEAKING [VF]
― VIDEO MAG [VF]
― MAG. TIMER [VF]
VF VIDEO SETTING
― COLOR/MONO [VF]
― VIDEO SELECT
― DTL
― BOOST FREQ.
― NOISE SUP.
― CAPTURE DISPLAY [VF]
― DISP.INTERVAL [VF]
― GAMMA SELECT [VF]
― PICTURE-IN-PICTURE [VF]
― CHROMA UP [VF]
18
Initial
Setting value
setting
OFF ON, OFF
H&V H&V, H-ONLY
1 1 to 4
0 0 to 9
OFF OFF, X2, X4, X8
OFF ON, OFF
100 MIN to 100(1step)
0 0 to MAX(1step)
WHITE, YELLOW, RED,
WHITE
BLUE, GREEN
X2 X2, X4, X8
OFF OFF, 1 to 7sec
COLOR COLOR, MONO
Y, R+G+B 、
R/G/B
R, G, B, R/G/B
35 0 to 100
10MHz, 15MHz, 18MHz,
10MHz
18MHz, WIDTH
0 to 100 continuously
3
variable
OFF OFF, ON
HOLD,
1FRAME 1, 2, 3, 5, 10, 30,
60FRAME
GAMMA 1, 2, 3, 5, 10, 30,
2.2 60FRAME
OFF OFF, ON(R) ,ON(L)
OFF OFF, ON
UHL-43 2005 VER1 (E)
Description, Remarks
Sets the ON/OFF of PEAKING on the VF screen.
Sets the edge mode of PEAKING.
Sets the edge width of PEAKING.
Sets the removal level of the noise signals.
Sets the PEAKING level (x2/x4/x8).
Sets the ON/OFF of PEAKING corresponding to the ZOOM ratio of the
camera lens.
Sets the maximum Tele side value of ZOOMUP PEAKING.
Sets the minimum Wide side value of ZOOMUP PEAKING.
Gives colors to PEAKING of the VF video.
Sets the display settings of the VF screen magnification function.
Sets the display time of the VF screen magnification function.
Switches between COLOR/MONO for the VF screen.
Sets the video signals to change the VF screen to MONO display.
Sets the VF detail amount. The detail amount decreases in the direction of
"0" and increases in the direction of "100".
Sets the outline correction highlight horizontal frequency in the VF screen.
Sets the noise removal level during outline correction in the VF screen.
Performs a capture of the VF display screen.
Sets the display interval of the VF screen display.
Sets the gamma curve of video signals that are displayed on the VF screen.
Set ON/OFF and position of PINP.
Sets ON/OFF of the function that increases the color strength of the VF
video.
<< FOCUS ASSIST continues to the next page >>