Table of Contents
Advertisement
Menu Item
STANDARD GAMMA
― GAMMA TABLE
CUSTOM GAMMA
― EASY MODE
― DEFAULT RESET
― SELECT
― CURVE TYPE
― INITIAL GAIN
― 18% GRAY
― DYNAMIC RANGE
― WHITE LIMIT
― CAL
― SAVE
― SHUTTER
― SHUTTER SPEED
― GAMMA CURVE COPY
― USB MEMORY
― SAVE
― LOAD
Initial
Setting value
setting
STANDARD1,
STANDARD1
STANDARD2
-
EXECUTE, CANCEL
NORMAL
NORMAL, CUSTOM1to5
NORMAL, LOG,
NORMAL
SPECIAL
4.5
1.0 to 9.0
OFF
READY
EXECUTE, CANCEL
OFF, PRESET,
OFF
VARIABLE
PRESET
1/100, 1/120, 1/250, 1/500,
-
1/1000, 1/2000
VARIABLE
CUSTOM1to5, ALL
-
>CUSTOM1to5, ALL
-
-
UHL-43 2005 VER1 (E)
5 Camera Setting and Adjustment
Description, Remarks
Select the standard gamma table.
Easy creation mode. Sets various parameters and creates the custom gamma data.
Returns to the original custom gamma data.
The original data cannot be recovered once it is overwritten with the "SAVE"
function.
Selects the gamma table to be created.
Sets the basic properties of gamma curve.
increases.
Sets what level it should be after the gamma has been applied when converting
Sets the maximum level (the maximum input level to the gamma) before the
gamma has been applied.
Sets the white clip after the gamma has been applied.
Selects the test waveform (CAL) to check the gamma table.
Saves the data that has been created.
The data is temporary unless you save it. Therefore, the data will be cleared if
you end the menu without saving it.
Selects the electronic shutter.
Selects the shutter speed.
(Only when SHUTTER is PRESET and VARIABLE)
Copies the custom gamma data created to other gamma table in the camera.
Saves the custom gamma data to the USB memory.
Loads the custom gamma data from the USB memory.
<< VIDEO ADJUSTMENT continues to the next page >>
<< VIDEO ADJUSTMENT continued >>
25
Advertisement
Table of Contents
