Ikegami UHL-43 Operation Manual page 31

■ ⑥ LENS
Menu Item
AUTO IRIS SET
― IRIS MOTION
― IRIS SET MODE
― IRIS LEVEL SET
― PEAK RATIO SET
― WINDOW
― IRIS SPEED
― IRIS GAIN
― IRIS LIMIT
FILE SETTING
― NUMBER
― NAME
―（ MODEL ）
― EXTENDER
― AUTO SEL
― FILE SET
― LENS TYPE
SERIAL I/F （ E ）
Initial
Setting value
setting
STUDIO STUDIO, OUTSIDE
OFF ON, OFF
0 -100 to +100
-70 -100 to +100
1 WINDOW1 to 6
50 1 to 100
50 1 to 100
F16 F22, F20, F18, F16
OFF NO.1 to NO .16, OFF
(---------) 12 characters
Name display section for
(---------)
AUTO SEL
ON-1, ON-2, ON-3,
OFF
x0.8 CONV, OFF
OFF ON, OFF
MANUAL, AUTO(AWS),
OFF
AUTO(FULL), OFF
C.PORTABLE
C.STUDIO
C.FIELD
OFF F.PORTABLE
F.STUDIO
F.FIELDOFF
OFF
ENABLE ENABLE, DISABLE
UHL-43 2005 VER1 (E)
5 Camera Setting and Adjustment
Description, Remarks
Set auto iris overall response in accordance to the application.
ON : Enables auto-iris operation setting.
If set to "ON", the iris adjustment from the remote controller is disabled.
Adjusts the convergence level of auto iris.
Shoot the registration chart with the camera and adjust the value so that the video
Shoot the gray scale chart with the camera and adjust the value so that the video
Set the exposure for a bright area in the "+" direction and for a dark area in the "-"
direction.
Sets the detection area of the auto iris.
Sets the response speed characteristics of the auto-iris.
The auto-iris speed becomes slower for "1" and faster for "100".
Sets the auto-iris response sensitivity characteristics.
The auto-iris operation sensitivity is such that "1" is low and "100" is high.
Hunting tends to occur more often as the value goes up. (Set it to the default value "50"
as long as hunting is not occurring)
Sets a limit on the iris closing during auto iris operation.
Selects the lens file No.
- If the lens code is obtained from the lens, "(CODE SEL)" is displayed on the
back of the lens No. display.
- If "AUTO SEL" is set to "ON", "(AUTO SEL)" is displayed on the back of the
lens No. display.
Sets the file name per lens file.
Giving the lens type name, etc. makes easier to find the lens No. and lens
compatibility.
Displays the lens name obtained from a serial lens.
Displays the extender status.
Automatically switches the lens file No. according to the type name obtained
from the lens.
Please refer to "5.3 Creates the Lens File" for more details on FILE SET.
Sets the lens type used to match the operation property of the zoom tracking
DTL to the zoom property of the lens.
This is set per lens file (No. 1 - 8).
Lens type
C.PORTABLE : Canon portble lens
C.STUDIO : Canon studio lens
C.FIELD : Canon field lens
F.PORTABLE : Fujinon portble lens
F.STUDIO : Fujinon studio lens
F.FIELD : Fujinon field lens
OFF : Zoom tracking DTL is OFF.
Sets the ENABLE/DISABLE to the serial interface of the lens.
21