Table of Contents
Advertisement
Auto Setup Display
① Auto setup function
② Execution result of auto setup
③ Adjustment item of auto setup
① Auto setup function
Executing auto setup function is displayed.
"AWB"
"ABB"
"FULL SETUP"
"LEVEL SETUP" etc.
② Execution result of auto setup
Execution result of auto setup (AWB, ABB, etc.) is displayed.
OK
: Auto setup has been completed.
NG
: Auto setup was not completed.
STOP
: Auto setup was discontinued.
LEVEL OVER
: Input signal level is too high.
LEVEL UNDER : Input signal level is too low.
③ Adjustment item of auto setup
The item to which adjustment is being made is displayed
during auto setup.
"FLARE GAMMA GAIN"
"PED"
"IRIS" etc.
Center Marker, Safety Marker, Frame
Marker
- The Center Marker is used to ascertain the center of the
screen or align the camera horizontally and vertically. The
center marker is selected from three types of shapes on the
Menu screen.
- The Safety Markers are used to check the action safety area
or title safety area. Switching between the action area and
the title area is made from the menu.
- The Frame Marker is used to ascertain the frame of the
image being shot.
- Aspect ratio (4:3/13:9/14:9/16:9) can be set to the Safety
Markers and Frame Marker separately.
Reference
Please refer to "5.2 Menu structures and contents" for
the setting method of the markers.
Center Marker
Safety Marker
Title Area
Frame Maker
UHL-43 2005 VER1 (E)
5 Camera Setting and Adjustment
ZEBRA Indicator
Zebra Pattern means a stripe pattern displayed over the video.
displays the part where the video level of the subject exceeds
the setting value, and the second Zebra signal displays the
part where the video level matches with the setting value.
The ZEBRA indicator can be turned on/off when assigned to
Reference
Please refer to "5.2 Menu structures and contents" for
the setting method of zebra signal.
Side Mask Function
When the camera output aspect ratio is set to 16:9, the picture
consideration of converting to a 4:3 picture, the contrast of
the picture outside the frame marker area can be adjusted.
The side
mask is displayed when the frame marker is set to the
following ratio:
- With 16:9 mode : 4:3, 13:9, 14:9, 15:9
Brightness of the picture outside the
frame marker can be adjusted.
Reference
See "5.2 Menu structures and contents" for how to set
the side mask.
ZEBRA signal
43
Advertisement
Table of Contents
