Table of Contents
Advertisement
5 Camera Setting and Adjustment
Creation of the lens OFF file
1
Open the ENGINEER MENU screen and select
"LENS." Press the MENU RE.
Caution
For the setting of ENGINEER MENU, refer to "5.1 Basic
Operation of the Menu."
2
On the Submenu screen, select "FILE SETTING"
under "LENS" and press the MENU RE.
3
Select "OFF" by "NUMBER."
4
Select "AUTO" from "FILE SET" and then select
"START."
Start acquiring the data. When "COMPLETED" is
36
Creation of a lens file
In this section, the setting method for the serial interface
supported lens case is described.
1
Open the ENGINEER MENU screen and select
"LENS." Press the MENU RE.
2
On the Submenu screen, select "FILE SETTING"
under "LENS" and press the MENU RE.
3
Select "No. **" by "NUMBER."
Select from No. 1 to No. 16.
Specify the desired number to be set for the
"NUMBER."
number, the data is overwritten and updated.
4
Select "ON" by "AUTO SEL."
line).
At his time, "NAME" (2nd line) and "EXTENDER"
information is automatically acquired.
Memo
between the lens number and the lens becomes easy by
providing the lens model name.
name of the second line (AUTO SEL NAME display
section) displays the model name which is automatically
acquired from the lens.
UHL-43 2005 VER1 (E)
Advertisement
Table of Contents
