Table of Contents
Advertisement
5 Camera Setting and Adjustment
■ ⑦ FUNCTION SW
Menu Item
FUNC SW1
FUNC SW2
FUNC SW 3/4[HANDLE]
ZOOM SPEED
FOCUS SPEED
UP/DOWN
VTR SW
VF F1 SW [VF]
VF F2 SW [VF]
VF F3 SW [VF]
VF F4 SW [VF]
22
Initial
Setting value
setting
NONE
NONE, FOCUS ASSIST,
CALL, ABB, AWB, AWB
CH, DISPLAY MODE,
FAN, FILTER LOCAL,
RET
NONE
NONE, ZOOM, FOCUS,
NONE
RET/NONE
15
0 to 100
15
0 to 100
NONE
NONE, GAIN, ND, CC
---
FOCUS ASSIST, RET
NONE, CAPTURE,
MONO
CHROMA, CPTDISP,
FAN, GAMMA, MAG,
MARKER, MONO,
MARKER
NOISESUP, PEAKING,
PEAKUP, PRESET,
REVERSE, SCENE, SDI,
SDI
TALLY, USRMRK, VSC,
WFM, ZMPEAK, P-IN-
P(VF), GAMMA1.4,
FOCUS ASSIST, P-IN-
TALLY
P(RET)
UHL-43 2005 VER1 (E)
Description, Remarks
Selects the function to be assigned to each function switch.
If it is set to ABB and AWB, ABB and AWB are performed when the function
switch press and held for approximately 2 seconds.
If it is set to FOCUS ASSIST, the following operation is performed.
The [ASSIST AREA] items on the TOP MENU - FOCUS ASSIST - FOCUS
ASSIST WINDOW screen are switched every time SW is p__ressed.
When a serial lens is attached: Repeats TRIGGER ON < > OFF.
When a lens other than serial lens is attached: Repeats ALWAYS ON <__> OFF
Sets the function of FUNCTION SW3 and FUNCTION SW4 on the top part of
the handle. To assign it to ZOOM and FOCUS, it requires a serial lens.
Sets the operation speed of ZOOM control.
"0" indicates a slow speed and "100" indicates a high speed.
Sets the operation speed of FOCUS control.
"0" indicates a slow speed and "100" indicates a high speed.
Selects the function to be assigned to UP/DOWN switches.
Sets a function of the VTR SW on the lens.
If the TRIGGER item on the FOCUS ASSIST menu is set to "LENS VTR",
"FOCUS TRIG" is fixed (information display).
Sets the function to the FUNCTION switch F1.
Sets the function to the FUNCTION switch F2.
Sets the function to the FUNCTION switch F3.
Sets the function to the FUNCTION switch F4.
Advertisement
Table of Contents
