Mitsubishi Heavy Industries BD2GII Service Manual page 86

DISASSEMBLY AND REASSEMBLY
Inspection
1. Shift forks
Measure the clearance of each shift fork in its
groove in thesliding gear. Replace the fork if the
measurement exceeds the service limit.
Assembly standard
0.1 to 0.3
(0.004 to 0.012)
Unit: mm (in.)
ervjc~J
0.5 (0.020)
2. Detent springs
Measure the free length and test force of each
spring. Replace the spring if any of these
measurements exceeds the service limit.
Unit: mm (in.)
~ Item Assembly Se~ice limit
7
j_~
standard
I
Test force,
I
kgf (lbf) [N] 9.80 ± 0.49 7.5
I
(Initial working (22 ± 1) (17)
I
length: [96 ± 5] [74]
L55
(2.17))
3. Gear backlash
Measure the backlash of the gears. Replace the
gears if the measurement exceeds the service
limit.
86