Advertisement
TES11NG AND ADJUSTING
Testing the control valve
Connect an oil pressure gauge to each of taps M,
S and D in testing the hydraulic pressures with
the control valve mounted on the transmission.
When running the transmission and control valve
on the bench in order tO break them in, be sure to
form an oil cooler bypassing circuit by connect
ing two rubber hoses, one leading to the cooler
inlet and the other from the cooler outlet.
1 Main relief,pressure: Tap M
2 Speed clutch (1 st-speed, 2nd-speed and 3rd-speed)
pressure: Tap S
• 3 Directional clutch (forward and reverse) pressure:
Tap D
43
Advertisement
