Advertisement
DISASSEMBLY AND REASSEMBLY
6
Steering clutch levers
7
Steering control rods
8
Brake control rods
2. Disconnect the following parts:
9 Steering clutch oil hoses (2 pcs)
3. Remove the following parts:
10 Universal joint
11
TransmisSion
NOTE
Before hoisting the transmission, shift it
forward to pull the pinion back out of mesh
with the bevel gear.
Installation
To install, follow the reverse ofrem oval sequence.
Inspection after installation
(1) Make sure that the electric wires, pipes and
hoses are connected properly.
(2) Fill the transmission case and bevel gear
case with recommended oil.
602389
c3~S~
602390
82
Advertisement
