Advertisement
DISASSEMBLY AND REASSEMBLY
3. Planet carrier spring pin installation
Drive in the spring pin with its gap positioned in
the direction of carrier rotation. Drive in the
planet pin with its mark A outside.
4. Clutch piston installation
Apply a coat of hydraulic oil (SAB lOW) to the
sliding surface of each piston seal, and install the
seal to the clutch piston as shown.
5. Piston housing installation
Install the piston housings (5 pcs) with their
recessed portions aligned as shown. This illus
tration shows the piston housings seen from -the
engine end.
106
Advertisement
