Advertisement
DISASSEMBLY AND REASSEMBLN'
Suggestions
1. Detent group (interlock mechanism) removal
To remove the detent group, place the transmis
sion control lever in NEUTRAL.
Carefully handle steel (detent) balls C3,
ClO
and C15 to prevent them from getting
lost.
2. Shaft removal
Drive the transmission shafts out of the case in
the following directions:
(1) Drive out input shaft (main drive shaft) B 14
toward the steering clutch case side.
(2) Drive out countershaft D12 toward the
steering clutch case side.
(3) Drive out bevel pinion shaft El 2 toward the
universal joint side.
3. Bevel pinion shaft bearing cage removal
Using jacking..bolts, rei~ove bearing cage E3
together with bearing E5 and shims E4.
4. Bevel pinion shaft bearing removal
Remove the inner race and rollers of bearing
Eli. Remove the outer i~ace if necessary.
602395
602396
85
Advertisement
