Advertisement
DISASSEMBLY AND REASSEMBLY
ENGINE REMOVAj. AND INSTALLATION
Removal
Start by:
(a) drain the engine oil from the engine and
flywheel clutch (DD) or from the engine
and damper (DPS)
Capacities
Engine: 7 liters (1.8 U.S. gal)
Flywheel clutch: 5.5 liters (1.5
U.s.
gal)
Damper: 3.5 liters (0.9 U.S. gal)
The oil may be drained with the engine
and flywheel clutch or damper hoisted
after they are removed from the machine.
(b) drain the coolant [13 liters (3.4 U.S. gal),
approx.]
(c) raise the bucket fully and support the lift
cylinders with the bracket (lower it to the
ground rubber after removing the radiator
guard and side covers (BS3GI[))
(d) disconnect the hoses and pipes from the
blade tilt cylinder (BD2GII-PT)
1
Radiator grille
2
Rubber hoses
(2
pcs)
3
Rubber plate
4
Clamp
5
Pipes(2pcs)
Disconnect pipes 5 after removing the
engine room side cover.
66
Advertisement
