Advertisement
DISASSEMBLY AND REASSEMBLY
9
Cover
10 Shaft
11 Spring
12
Steering
brake mounting
bolts
(4
pcs)
13 Bracket
4. Raise the rear end of the machine by posi
tioning a jack under the steering clutch case
so that the sprockets can be freely rotated,
and
block the final drive cases, using
wood
blocks, as shown.
5. Hold the clutch pedal in depressed position,
and, place the transmission control lever in
forward 1st position.
6
Unscrew bolts 14
and
15 securing the steer
ing clutch & brake assembly. To do this, turn
the splined portion of traiismission input
shaft S to rotate that assembly to remove the
bolts one by one.
Advertisement
