Advertisement
TESTING AND ADJUSTING
INCHING PEDAL
TRANSMISSION CONTROL LEVER
1. Loosen lock nut 1.
2. Reposition stopper bolt 2 so that the inching
pedal is 20 cm (7.9 in.) from the dashboard
wall.
Loosen lock nut 3.
Adjust the length of rod so that lever 4 starts
moving when the inching pedal is depressed.
Loosen lock nut 6.
Reposition stopper bolt 7 so that the pedal
stroke is 14.5 cm (5.7 in.).
2. Turn rods 4 and 5 to adjust c1earani~e a.
3.
4.
5.
6.
Clearance a between guide 2 and lever 1
should be 0.5 to 2.0 mm (0.02 to 0.08 in.)
in any lever position.
1. Loosenlocknut3.
45
Advertisement
