DISASSEMBLY AND REASSEMBLY
Removal
Start by:
UNDERCARRIAGE
(a) separate the tsacks (Refer to Removal,
TRACKS.)
(b) on the PT model, disconnect the hydraulic
hoses from the tilt cylinder, and remove the
blade and blade arms
Removal sequence
1. Remove the following parts:
1
Bolts securing rigid
bar
(4 pcs)
2 Bolts securing
rear
support (4 pcs)
2. Hoist orjack up the machine just a little,. and
securely block the rigid bars and steering
clutch cases, using wQod blocks.
3. Remove the undercarriage.
Installation
To install, follow the reverse of removal Se
quence.
132