DfSASSEMBLY AND REASSEMBLY
2. After removing the universal joint, remove
the following components from the flywheel
clutch housing:
(1) (3earpump
(2) Relief valve
(3) Oil strainer
(4) Clutch brake
Remove the universal joint together with
the flange attached to the front end of input
L
shaft.
3. Remove the oil filler from the threaded hole
(Mb— 1.25) at the top of clutch housing 9.
Attach hook A in that threaded hole, and
hoist the housing.
[~o~
When hoisting the clutch housing, cover
L~e
dashboard for protection.
4. Unscrew the bolts securing the clutch hous
ing, and move the housing backward until it
is possible to pull the main drive shaft out of
the clutch cover.
Have the sling off hook A and attach it to
s~hackIe B bolted to the housing through
L
one of the mounting bolt holes.
72