Advertisement
DISASSEMBLY AND REASSEMBLY
FLYWHEEL CLUTCH
There are two methods ofremoving the flywhe~l
clutch from the engine, off-the-machine method
and
on-the-machine method. For the former,
follow the steps under "ENGINE
REMOVAL
AND
INSTALLATION."
On-the-machine method
Start by:
(a) remove the under guard
(b) drain the oil from the clutch case
[5.5
liters (1.5
U.S.
gal), approx.]
I. Remove the following parts:
1
Floor plate (platform) (center, 1 pc)
2 Steering clutch levers (2 pcs)
3 Steering control rods~ (2 pcs)
4 Brake control rods (2 pcs)
5 Clutch control rod (1. pc)
6 Rubber hoses for steering clutches (2 pcs)
7 Rubber hoses for oil cooler (2 pcs)
8 Electric wire (by loosening clamps)
5
7
602334
3
602445
-~-
602375]
71
Advertisement
