DISASSEMBLY AND REASSEMBLY
Suggestions
Pinion adjustment
The dimension from the end face of the pinion to
the outer face of the transfer case is punched as
m (plus or minus value) on the end face of the
pinion. Shim adjust this dimension to [46.2 mm
(l.819in.)—m/JOO]±olmm(ocyj4in)ifthe
m value is plus or [46.2mm (1.819 in.)
+
m/100]
± 0.1 mm (0.004 in.) if the m value is minus.
The shims for adjusting the pinion are available
in these thickness:
Unit:
mm (in.)
[Part number
Shim
thicknesses
I
J
58827-10900
0.1 (0.004), 0.4 (0.016), 1.0 (0.039)
L58827~11000
0.1 (0.004), 0.4 (0.016), 1.0 (0.03~J
BEVEL GEAR
Installation
Install the bevel gear on the left side in case
of the DPS transmission; install it on the
~~right side in case of the DD transmission.
112