TESTING AND ADJUSTING
To adjust:
1. Apply grease., with a grease gun, into~the fill
valve until the slack or sag in the track is 20
to 30mm (0.8 to 1.2 in.).
2. Operate the machine backward and forward
to equalize the adjustment.
NOTE
When applying grease into the fill valve,
be careful not to increase the dimension A
(between the cylinder shaftflange andrigid
bar mounting bolt) more than is specified.
Dimension A
Unit: mm
(in.)
~~dar~swamP mode1~
400 (15.7)
[~~er swamp model
530 (21)
L~su1~1.
swamp model
490 (19.3)
49