Advertisement
DISASSEMBLY AND REASSEMBLY
Reassembly
~$uggestions
1. Floating seal installation
(1) When fitting the floating seals, use a prop
erly sized round bar or the special tool to
prevent damage to the seals and 0-rings.
~ CAUT~O~
Never use a screwdriver or a sharp-edged
tool to fit the floating seals.
(2) Using a lint-free cloth or a brush and wash
ing fluid, clean the surfaces of metal rings
of floating seals, making sure that these
rings
are
free of any grime.
2. Lubrication
(1) After reassembling the roller, fill it with
recommended oil through plug hole in the
shaft.
(2) Use an adaptor and volume pump for this
filling.
I
Capacity,
75
cc
(4.6 cu in.) (SAE9O gear oil)
~ approx.
Part
name
Part
number
Adaptor
58809-15100
Volume pump
58309-03100
Reassembly sequence
54321
141
Advertisement
