Advertisement
DISASSEMBLY AND REASSEMBLY
Removal and installation
TRANSMISSION CONTROL VALVE
1. Remove the transmission assembly includ
ing the control valve from the machine,and
remove the valve from the transmission.
(Refer to Removal, DPS TRANSMISSION.)
2. To install, follow the reverse of removal
sequence.
Disassembly
Disassembly sequence
(Remove 1 thru 9 as an assembly.)
1 Roller pin
2 Plug [0-ring]
(Remove 3 and 4 as an assembly.)
3 Slug
4 Valve
5 Inner spring
6 Outer spring
7 Roller pin
8 Plug [0-ring)
9 Valve body
10 Cover [0-ring]
11 Accumulator piston
12 Seat
13
Outer spring
14 Inner spring
15 Pin(3pcs)
16 Plug (2 pcs) [0-ring]
17 Spring (2 pcs)
18 Detent ball (2 pcs)
19 Cover [switch, 0-ring]
20 Speed selector plunger
21 Spring
22 Differential valve
23 Directional plunger
24 Return spring
25 Inching valve
26 Inching spring
(Remove 27
and 28 as an assembly.)
27 Oil
seal
28 Cover
29 Spring [washer]
30 Inching valve plunger [snap ring]
31 Roller pin
32 Plug
33 Oil seal (2 pcs)
34 Plug [0-ring]
35 Screw
36 Valve housing
108
Advertisement
