Advertisement
TES11NG AND ADJUSTING
STEERING CLUTCHES
[~pTE~
The steering clutches and brakes are inter
locked with each other. This means that
~hey mustbe adjusted at one time. Make
L
adjustment (A) thru (D) in that order..
(A) Adjusting the released position of
steering clutch levers
1. Loosen locknut 1.
2. Set lever 2 by turning stopper bolt 3 so that it
is 9.0 to 9.5 cm (3.5 to 3.7 in.) from the front
end of dashboard. (Equalize the right-hand
and left-hand lever positions.)
3. Loosen lock nut 4.
4. Set the knob of steering clutch lever 5 by
turning the lever so thatitis 6.5 to 7.5cm (2.6
to 3.0 in.) from the end of instrument panel.
(B) Adjusting the clearance between brake
band and outer drum
1. Screw adjusting nut 6 all the way.
2. Back off the nut 2-2/3 rotations.
(C) Adjusting the stroke of steering clutch
levers
1. Loosen lock nut 7.
2. Set the stroke by.means of clevis 8 so that
is 20 to 22 cm (7.9 to 8.7 inS) from release
position to fully pulled position.
When making a connection to lever 9,
lightly push lever 9 forward until it en
counters a resistance, with return spring 10
unhitched.
(D) Connecting steering lever to steering
valve
1. Loosenlocknutil.
2. Bring roller 13 into contact ~'ith the end of
plunger (piston) 12 of the steering valve by
means of clevis 14.
NOTE
Do not push in the plunger.
46
Advertisement
