Advertisement
DISASSEMBLY AND REASSEMBLY
TRACK CARRIER ROLLERS
Removal
Start by:
(a) loosen the tracks (Refer to TRACKS,
TESTING AND ADJUSTING.)
(b) drain the oil from the track carrier rollers.
Removal sequence
Push up the track above the carrier roller to
produce some clearance between track 1 and
carrier roller 2, and remove the following parts:
1
Bolts (2
pcs)
2 Track carrier roller
Installation
To install, follow the reverse of removal se
quence.
Suggestions
Insert the shaft into the bracket so that the arrow
mark on one end points upward and the spring
pin hole on the other comes to the top side.
Adjusting after installation
Adjustthe tracks. (Referto TRACKS, TESTING
AJ~J) ADJUSTING.)
145
Advertisement
