DISASSEMBLY AND REASSEMBLY
6. Oil seal installation to retainer
Install the oil seal to the retainer as shown.
Testing after reassembly
Apply dirt-free pressure air to the oil holes in the
transmission case to make sure that the clutch
pistons move smoothly in the housing.
A Oil hole for reverse clutch
B Oil hole for forward clutch
C Oil hole for 1st-speed clutch
D Oil hole for 2nd-speed clutch
E Oil hole for 3rd-speed clutch
2
to
3
kgfIcm~
Air pressure
(28 to 43 psi)
~
[196to294kPa]
~••~
60.2360
602361
107