Managing Your Device; Installing The Sendpro C, Sendpro - Pitney Bowes SendPro С User Manual

Installing the SendPro C, SendPro+

If you are installing a SendPro C, SendPro+ for the very first time, follow these instructions.
1. Before you begin
2. Open the box
3. Unpack the device
4. Install the printhead
5. Install the ink cartridge
6. Connect device to a power source
7. Continue installation steps
Before you begin
Before you being installing your new SendPro C, SendPro+, you need to decide what type of connection
(wired or wireless) you wish to use.
Choose your connection type
Wired
Takes about 10 minutes
Requires an available internet jack and power outlet
Wireless
Takes about 15 minutes
Requires access to a wireless network and power outlet
Pitney Bowes User Guide November 2020
3 • Managing your device
41