Setting The Clock - Ametek ta7000R User Manual

Trace analytical gas purity monitor
Hide thumbs Also See for ta7000R:
Table of Contents

Advertisement

System Settings Page
The first Page Screen is for general configuration settings. The following
list shows the function of each option for this screen
Idle Mode
-------------------- System Errors --------------------
Image of the System Settings Screen
List Item
Clock
EDL Analysis Mode
Print Chromatograms
Table of functions on the System Settings Screen

Setting the Clock

Use the arrow keys to move the cursor in front of the clock field. Press the
Edit key. Move the cursor to the first number and use the up and down
arrows to make changes. The time format is DD-MMM-YY HH:MM:SS;
where DD is the numeric day, MMM is the first three letters of the month,
YY is the last two digits of the year, HH is the hour in 24 hour time format,
MM is the minute, and SS is the seconds. When finished press the Esc key
and the time will be set.
EDL Mode
This field toggles the Enhanced Detection Limit mode on and off. Use the
System Settings
Clock: 10-Jan-03 12:34:25
*
Print Chromatograms:
EDL mode:
Edit
Print
12:34:25
Ver. 2.70
+
+
Page
What it does
Set time and date
Enhanced Detection Limit mode
Prints chromatograms after each run
User Manual | 37

Advertisement

Table of Contents
loading

Table of Contents