Connect Ac Power And Communication Cables - Ametek ta7000R User Manual

Connecting AC Power and Communications Cables
30 | Model ta7000R Gas Purity Monitor
! IMPORTANT: Verify that the operating voltage of the instrument
matches the available AC power. The analyzer does not auto select for
CAUTION
varying power line voltages.
Correct instrument operating voltage is labeled on the rear panel directly
above the DIN connector / power switch.
Confirm the instrument power switch is OFF ("O" is Depressed)
Connect DIN power cord to instrument
Connect DIN power cord to AC voltage source
CONNECT COMMUNICATIONS CABLES (if applicable)
COM1, COM2, COM3 port, PARALLEL PRINTER port