Gases - Ametek ta7000R User Manual

Actuator Gas
Inlet Fitting
Inlet Pressure Range
Gas Type
Gas Type (for ta7000R-O2 Only)
Calibration Gas
Inlet Fitting
Cylinder concentration
Cylinder volume
Supply pressure
Consumption
Chassis
Dimensions
Weight
Power
* 1/4-inch face seal x 1/16-inch adapter fi ttings are available from Ametek
1/8-inch VICI compression fitting
70 to 150 psig (4.8 to 10.2 bar)
Inerts (Nitrogen, Argon, Helium), 7
nines or better or CDA, dewpoint < -65 °C
Inerts (Nitrogen, Argon, Helium), 7
nines or better
1/16-inch VICI compression fitting
5 to 10 ppm H2, CO, balance nitro
gen
100 cubic feet minimum (2800L)
80 to 90 psig (5.4 to 6.1 bar)
Approximately 1.0 L per calibration
(4 to 8 L/ month), automatic shut off
between calibration
7" (18cm) H x 16.8" (43cm) W x 26.5"
(67cm) D
35 lb. (15.9 kg)
100 - 120 VAC, 50/60 Hz,; 200 - 240
VAC, 50/60 Hz
User Manual | 17