Table of Contents
Advertisement
START-UP AND OPERATION
Power Up
Adjust incoming gas supply pressures as specified in the Specifications
pages 15-21 of this manual.
Turn the instrument on by depressing the power DIN switch (1 is de-
pressed) on the back panel of the analyzer. The Power/Status LED on
the front panel and the rear cooling fan should activate and the opening
screen should appear within a few seconds. If any of these does not oc-
cur, turn the power off immediately and contact Molecular Analytics or
your local authorized service agent.
Opening screen at AC power-up
NOTE: Do not continue with this section until all prodedures in the
previous section have been completed.
User Manual | 31
Advertisement
Table of Contents
