JLG TOUCAN 10E Service And Maintenance Manual page 79

the cylinder barrel. Ensure that piston seals are not
damaged or dislodged when entering the threaded
area of the barrel (Steer cylinder).
8. Continue pushing the rod into the barrel until the cyl-
inder head gland can be inserted into/onto the bar-
rel cylinder.
9. Secure the cylinder head gland.
10. After the cylinder has been reassembled, the rod
should be pushed all the way (fully retracted).
31210090 – JLG Lift –
SECTION 7 - HYDRAULICS
7-11