JLG TOUCAN 10E Service And Maintenance Manual page 140

SECTION 11 - GENERAL ELECTRICAL INFORMATION & SCHEMATICS
Figure 11-7. Connector Assembly Figure 2
3. After all required contacts have been inserted, the 4. Slide the wedge lock into the housing until it is flush
wedge lock must be closed to its locked position. with the housing (See Figure 11-9).
Release the locking latches by squeezing them
inward (See Figure 11-8).
Figure 11-9. Connector Assembly Figure 4
Figure 11-8. Connector Assembly Figure 3
11-6 – JLG Lift – 31210090