Setting The Installer Details; Setting The Parameters - DeDietrich C 340 Series Installation And User Manual

9 Installer instructions
Tab.65 Configuring a zone or function of CU-GH13 or SCB-10
Parameters, counters, signals
Parameters
Counters
Signals
Adv. Parameters
Adv. Counters
Adv. Signals
Fig.83 Parameters, counters, signals
A
11:20 ... ..... .... ...... : .... ...... ....
............ ................
..... ... ....... .... .. ..... ....
B
....... .... .. ..... ....
....... ...........
..... ... ....... ....
..... ... ....... ....
........ .......
74 C 340 / C 640
Description
Set the parameters at installer level
Read the counters at installer level
Read the signals at installer level
Set the parameters at advanced installer level
Read the counters at advanced installer level
Read the signals at advanced installer level
9.2.1
You can store your name and phone number in the control panel to be
read by the user.
9.2.2
You can change the parameters and settings of the appliance and the
connected control boards, sensors etc. to configure the installation.
10. If available, select Adv. Parameters to change a parameter at the
..............
.........
.......
...
......
The boiler's control unit is set for the most common central heating
.....
systems. These settings will ensure that virtually every central heating
.....
system operates effectively. The user or the installer can optimise the
AD-3000936-02
parameters as required.

Setting the installer details

1. Press the button.
2. Use the rotary knob to select System Settings
3. Press the button to confirm the selection.
4. Use the rotary knob to select Installer Details.
5. Press the button to confirm the selection.
6. Enter the following data:
Installer name
Installer phone

Setting the parameters

1. Press the button.
2. Use the rotary knob to select Installation Setup.
3. Press the button to confirm the selection.
4. Use the rotary knob to select the zone or device you want to
configure.
5. Press the button to confirm the selection.
6. Use the rotary knob to select Parameters, counters, signals.
7. Press the button to confirm the selection.
8. Use the rotary knob to select Parameters to change a parameter.
9. Press the button to confirm the selection.
advanced installer level.
A Parameters
Counters
Signals
Adv. Parameters
Adv. Counters
Adv. Signals
B List of settings or values
.
Name of the installer
Phone number of the installer
7762666 - v.02 - 29092020