User Instructions; Accessing The User Level Menus; Home Screen - DeDietrich C 340 Series Installation And User Manual

8 User instructions

8 User instructions
8.1

Accessing the user level menus

Fig.75 Menu selection
22/02/2018 11:20

Home Screen

Not set
... ...
........ .......
......
Fig.76 Confirm menu selection
22/02/2018 11:20 Home Screen
Not set
... ...
........ .......
......
8.2 Home screen
Tab.56 Selectable tiles for the user
Tile Menu
Information menu.
Error indicator.
Holiday mode.
Gas boiler indicator.
Water pressure indicator.
Heating circuit set-up.
, ,
, ,
, ,
DHW setup.
Outdoor sensor setup.
66 C 340 / C 640
........ .......
AD-3001387-01
........ .......
AD-3001388-01
Function
Read out various current values.
Read out details about the current error.
With some errors the
filled in).
Set the start and end date of your holiday to lower the room and domestic hot
water temperatures of all zones.
Read out burning details of the boiler and switch the heating function of the
boiler on or off.
Shows the water pressure. Top up the installation when the water pressure is
too low.
Configure the settings per heating circuit.
Configure the domestic hot water temperatures.
Configure the temperature regulation using the outdoor sensor.
The tiles on the home screen provide quick access for the user to the
corresponding menus.
1. Use the rotary knob to select the required menu.
2. Press the button to confirm the selection.
The available settings of this selected menu appear in the display.
3. Use the rotary knob to select the desired setting.
4. Press the button to confirm the selection.
All options for change will appear in the display (if a setting cannot
be changed, Cannot edit read-only datapoint will appear in the
display).
5. Use the rotary knob to change the setting.
6. Press the button to confirm the selection.
7. Use the rotary knob to select the next setting or press the
return to the home screen.
The tiles on the home screen provide quick access to the corresponding
menus. Use the rotary knob to navigate to the menu of your choice and
press the button to confirm the selection. All options for change will
appear in the display (Cannot edit read-only datapoint will appear in the
display if a setting cannot be changed).
icon will appear with installer contact details (when
button to
7762666 - v.02 - 29092020