Setting The Activities Temperature; Monitoring The Energy Consumption - DeDietrich EASYLIFE CFU 36 F30 User Manual

4. Enter the chosen name in the following table:
Factory-set name
Morning
Sleep
Home
Evening
Away
Custom
5. Go back to the main screen by pressing the back key
6.7.3

Setting the activities temperature

It is possible to set the temperature for each activity in each available zone.
1. Go to the menu: Heating temperature.
Tab.34
Type of access
Direct access: from the main home screen
Quick access: from any screen
2. Select the required activity:
Tab.35
Activity
Sleep
Home
Away
Morning
Evening
3. Set the temperature value assigned to the chosen activity.
4. Confirm by pressing the selector
5. Go back to the main screen by pressing the back key
6.8

Monitoring the energy consumption

If the installation is equipped with an energy meter, the energy consumption can be monitored.
7740570 - v04 - 03112022
New name
Access path
→ Select the page corresponding to the required zone
→ Press the selector
→ Select: Heating temperature
→ Press the
→ Select
→ Select the desired zone:
Parameter Parameter name
for the Zone1
or for the Zone2 (only if the SCB-04 optional PCB is connected)
CP080 Room setpoint temperature of the user zone activity
Can be set from 5 °C to 30 °C
CP081 Room setpoint temperature of the user zone activity
Can be set from 5 °C to 30 °C
CP082 Room setpoint temperature of the user zone activity
Can be set from 5 °C to 30 °C
CP083 Room setpoint temperature of the user zone activity
Can be set from 5 °C to 30 °C
CP084 Room setpoint temperature of the user zone activity
Can be set from 5 °C to 30 °C
to save the setting.
.
key
Heating temperature
Zone1
Zone2 (only if the SCB-04 optional PCB is connected)
.
6 Settings
CFU 25