Changing The Heating Activity Temperatures; Changing The Room Temperature Temporarily; Switching The Summer Mode On Or Off; Changing The Display Settings - DeDietrich C 340 Series Installation And User Manual

8.6

Switching the summer mode on or off

8.7

Changing the display settings

7762666 - v.02 - 29092020
Activating a timer program
In order to use a timer program, it is necessary to activate the operating
mode Scheduling. This activation is done separately for each zone.
1. Select the tile of the zone you want to change.
2. Press the button to confirm the selection.
3. Use the rotary knob to select
4. Press the button to confirm the selection.
5. Use the rotary knob to select the timer program Schedule 1, Schedule
2 or Schedule 3.
6. Press the button to confirm the selection.
8.5.5

Changing the heating activity temperatures

You can change the heating temperatures of each activity.
1. Select the tile of the zone you want to change.
2. Press the button to confirm the selection.
3. Use the rotary knob to select
4. Press the button to confirm the selection.
A list of 6 activities and their temperatures is shown.
5. Use the rotary knob to select an activity.
6. Press the button to confirm the selection.
7. Set the heating activity temperature.
8. Press the button to confirm the selection.
8.5.6

Changing the room temperature temporarily

Regardless of the operating mode selected for a zone, it is possible to
change the room temperature for a short period. After this period has
elapsed, the selected operating mode resumes.
Important
The room temperature can only be adjusted in this way if a room
temperature sensor/thermostat is installed.
1. Select the tile of the zone you want to change.
2. Press the button to confirm the selection.
3. Use the rotary knob to select
4. Press the button to confirm the selection.
5. Set the duration in hours and minutes.
6. Press the button to confirm the selection.
7. Set the temporary room temperature.
8. Press the button to confirm the selection.
The Short temperature change menu shows the duration and the
temporary temperature.
You can switch off the central heating function of the boiler to save energy,
for example during the summer period.
1. Select the tile [ ].
2. Press the button to confirm the selection.
3. Use the rotary knob to select Force summer mode.
4. Press the button to confirm the selection.
5. Use the rotary knob to select the following setting:
5.1. On to switch off the central heating function.
5.2. Off to switch the central heating function on again.
6. Press the button to confirm the selection.
1. Press the button.
8 User instructions
Scheduling.
Set Heating Activity Temperatures.
Short temperature change.
C 340 / C 640 71