Parameters, counters, signals
Adv. Counters
Adv. Signals
Fig.14
Parameters, counters, signals
7725087 - v.01 - 06062019
Description
Read the counters at advanced installer level
Read the signals at advanced installer level
6.2.1
You can store your name and phone number in the control panel to be
read by the user.
6.2.2
You can change the parameters and settings of the appliance and the
connected control boards, sensors etc. to configure the installation.
A
The boiler's control unit is set for the most common central heating
systems. These settings will ensure that virtually every central heating
system operates effectively. The user or the installer can optimise the
parameters as required.
B
AD-3000936-01
6.2.3
When the boiler is fitted with the SCB-10 the following boiler CU-GH08
parameter(s) at installer level must be checked and adjusted, if necessary:
Setting the installer details
1. Press the
button.
2. Select System Settings
3. Enter the following data:
Installer name
Installer phone
Setting the parameters
1. Press the
button.
2. Select > Installation Setup.
3. Select the zone or device you want to configure.
4. Select Parameters, counters, signals > Parameters to change a
parameter.
5. If available, select Adv. Parameters to change a parameter at the
advanced installer level.
A
Parameters
Counters
Signals
Adv. Parameters
Adv. Counters
Adv. Signals
B List of settings or values
Caution
Changing the factory settings may adversely affect the operation
of the boiler.
For more information, see
List of parameters, page 56
Changing boiler parameters when SCB-10 is fitted
6 Installer instructions
> Installer Details.
Name of the installer
Phone number of the installer
AMC Pro
19