Scb-01 Expansion Pcb Signals - DeDietrich C 340 Series Installation And User Manual

10 Settings
Tab.113 Signals at advanced installer level
Code Display text
AM001 DHW active
AM011 Service required?
AM022 On / Off heat de­
mand
AM024 Actual rel. Power
AM033 Next Service Ind.
AM043 Pwr dwn reset nee­
ded
AP078 Out sensor detec­
ted
CM240 Zone Tout connec­
ted
CM280 ZoneRTC Tcal­
cRoomStp
GM006 GPS status
GM012 Release Input
GM013 Blocking Input
GM015 Vps Switch
PM003 ChTflowAverage
Tab.114 Navigation for basic installer level
Level Menu path
Basic installer
(1) See the column "Submenu" in the following table for the correct navigation. The signals are grouped in specific functionalities.
Tab.115 Signals at basic installer level
Code Display text
AM010 Pump speed
AM012 Status Appliance
AM014 Sub status
Appliance
122 C 340 / C 640
Description
Is the appliance currently in domestic hot
water production mode?
Is service currently required?
On / Off heat demand
Actual relative power of the appliance
Next service indication
A power down reset is needed
Outside sensor detected in the applica­
tion
Outdoor temperature sensor is connec­
ted to the zone
Internal room temperature setpoint cal­
culated by the room temperature control­
ler of the zone
Gas Pressure Switch status
Release signal for the CU
Blocking input status
Valve Proving System switch open /
closed
Actual average flow temperature
> Installation Setup > SCB-01 > Submenu
Description
The current pump speed
Current main status of the appliance.
Current sub status of the appliance.
10.4.5

SCB-01 expansion PCB signals

> Parameters, counters, signals > Signals
(1)
Range
0 = Off
1 = On
0 = No
1 = Yes
0 = Off
1 = On
0 - 100 %
0 = None
1 = A
2 = B
3 = C
4 = Custom
0 = No
1 = Yes
0 = No
1 = Yes
0 = No
1 = Yes
0 - 100 °C
0 = Open
1 = Closed
2 = Off
0 = No
1 = Yes
0 = Open
1 = Closed
2 = Off
0 = Open
1 = Closed
2 = Off
-25 - 125 °C
Range
0 % - 100 %
See
Status and sub-status,
page 144
See
Status and sub-status,
page 144
7762666 - v.02 - 29092020
Submenu
Gas fired ap­
pliance
Gas fired ap­
pliance
Gas fired ap­
pliance
Gas fired ap­
pliance
Gas fired ap­
pliance
Gas fired ap­
pliance
Outdoor tem­
perature
Direct zone
Direct zone
Gas fired ap­
pliance
Gas fired ap­
pliance
Gas fired ap­
pliance
Gas fired ap­
pliance
Gas fired ap­
pliance
Submenu
0-10 volt or
PWM out
System
Functionality
System
Functionality