System Configuration - Renesas M30290T2-CPE User Manual

M30290T2-CPE User's Manual

1.2 System Configuration

1.2.1 System Configuration
Figure 1.1 shows a configuration of the M30290T2-CPE system.
Host machine
(not included)
Figure 1.1 System configuration
(1) Compact emulator M30290T2-CPE (this product)
This is a compact emulator for the M16C/26A, 28, 29 Groups with the real-time trace functions (hereafter, emulator). The
M30290T-EPBM on which an evaluation MCU is mounted can be also purchased separately.
(2) USB interface cable (included)
This is an interface cable for the host machine and the emulator.
(3) Power supply for emulator
This is a power supply for the emulator. Supply 5.0 V ±5% (DC).
Prepare a power supply which complies with CE marking requirements separately. The power cable is included with this
product.
Note: Be aware that there are some AC adapters whose power supply voltage varies rather widely with its load. You are
recommended to use an AC adapter with a switching power supply or a stabilized power supply.
(4) User system
This is your application system. This emulator can be used without the user system.
REJ10J0494-0200 Rev.2.00 July 16, 2005
Power supply for emulator
(not included)
Compact emulator
M30290T2-CPE
Power supply cable
Pitch converter board
such as M30290T-80FPD
1. Outline
USB interface cable
Power supply
for user system
(not included)
User system
Page 14 of 86