M30290T2-CPE User's Manual
(3) Trace point setup dialog box
1. Opening the trace point setup dialog box
2. Trace Point Setting Window in initial state
REJ10J0494-0200 Rev.2.00 July 16, 2005
3. Usage (How to Use the Emulator Debugger)
Trace Point
Clicking this toolbar button opens the trace point setting
window.
Trace Point Setting Window in initial state
Be sure to select "Enable the trace point" in the Init dialog
box before you set up in this window. Here, you can set
events in the same way as for the hardware breakpoints.
Page 62 of 86