Renesas M30290T2-CPE User Manual page 58

M30290T2-CPE User's Manual
(4) Setting the hardware breakpoint combinatorial condition
1. Window for setting the combinatorial condition
REJ10J0494-0200 Rev.2.00 July 16, 2005
3. Usage (How to Use the Emulator Debugger)
Setting the combinatorial condition
There are following three conditions that you can choose for
the combinatorial condition.
- OR
The program breaks when one of the specified events
occurs.
- AND
The program breaks when all of the specified events
occur.
- AND (Same Time)
The program breaks when the specified events occur at
the same time.
When you have finished setting the combinatorial event
condition, click the "Set" button.
Page 58 of 86