Renesas M30290T2-CPE User Manual page 17

M30290T2-CPE User's Manual 1. Outline
(6) MCU Power Supply Source Selection Jumper (JP1)
This is a jumper switch to set the power supply source to the MCU. For details on this switch, see "2.6.1 MCU Power Supply
Source Selection Jumper/MCU Power Supply Voltage Selection Jumper" (page 24).
(7) MCU Power Supply Voltage Selection Jumper (JP2)
This is a jumper switch to set the power supply voltage of the MCU. This setting is valid when the MCU power supply source
selection jumper is set to INT only. For details on this switch, see "2.6.1 MCU Power Supply Source Selection Jumper/MCU
Power Supply Voltage Selection Jumper" (page 24).
REJ10J0494-0200 Rev.2.00 July 16, 2005 Page 17 of 86