Table of Contents
Advertisement
M30290T2-CPE User's Manual
(3) When DATA ACCESS is selected
1. Window for setting the address
2. Window for setting data
REJ10J0494-0200 Rev.2.00 July 16, 2005
3. Usage (How to Use the Emulator Debugger)
Setting the address
You can set eight conditions, e.g., a specified address, a
specified address range, etc.
Setting data
You can set two conditions, e.g., specified data or not to
compare data.
Setting the access condition
You can set three conditions, e.g., read, write, and
read/write. When you have finished setting the data and
access condition, click OK.
Page 56 of 86
Advertisement
Table of Contents
