Renesas M30290T2-CPE User Manual page 47

M30290T2-CPE User's Manual
(2) Flash Clear tab
1. Setting to clear the MCU's internal flash ROM
When you have finished the settings of 1 to 2, click OK.
REJ10J0494-0200 Rev.2.00 July 16, 2005
Cancel Help
3. Usage (How to Use the Emulator Debugger)
Setting to clear the MCU's internal flash
ROM
Specify whether or not you want the MCU's internal flash
ROM to be cleared when downloading the user program or
data. (When cleared, the content of the flash ROM is
initialized to 0xFF.) The MCU's internal flash ROM is
listed in block units.
- Any block which has had its check box selected is not
cleared when downloading. The memory content of this
block remains intact unless overwritten by downloading.
- Any block which has had its check box deselected is
cleared when downloading.
- Click the Select All button, and all blocks will be
selected (marked by a check mark, so that none of the
blocks is cleared when downloading).
- Click the Clear All button, and all blocks will be
deselected (check marks removed, so that all of them are
cleared when downloading).
The option you have specified here remains effective the
next time you start up.
Page 47 of 86