Table of Contents
Advertisement
M30290T2-CPE User's Manual
4. Opening the break event setting dialog box
(2) When FETCH is selected
1. Window for setting addresses
REJ10J0494-0200 Rev.2.00 July 16, 2005
3. Usage (How to Use the Emulator Debugger)
Specifying the event type
Select the event type that you want to set from the drop-
down list.
- FETCH
Detects an instruction prefetch.
- DATA ACCESS
Detects a memory access.
- BIT SYMBOL
Detects a bit access.
Setting the address
You can set eight conditions, e.g., a specified address, a
specified address range, etc. When you have finished setting
the address, click OK.
Page 55 of 86
Advertisement
Table of Contents
