Fade To Black Control Block - Sony CCP-8000 Series User Manual

Fade to Black Control Block

a FTB (fade to black) button
Press this button to fade to black the
program output of the PGM/PST bank, at
the set transition rate. You can set the fade
to black transition rate in the menu.
b Preview selection buttons
Press one of these buttons to select a signal
on the edit preview bus. Each button can be
assigned to any preview output in setup (see
"Overall Control Panel Settings (Config
Menu)" in Chapter 19 (Volume 3)).
PST (preset): When this button is pressed,
the signal selected on the background B
row of the PGM/PST bank is selected
on the edit preview bus.
M/E 1 to M/E 3, P/P (M/E1 to M/E 3, P/P
preview): The preview signal (M/E-1
PVW, M/E-2 PVW, M/E-3 PVW, P/P
PVW) of the M/E or PGM/PST bank
corresponding to the pressed button is
selected on the edit preview bus.
M/E1 K to M/E3 K, P/P K (M/E1 to M/E
3, P/P key preview): The key preview
signal (M/E-1 K-PVW, M/E-2 K-
76
Names and Functions of Parts of the Control Panel
3 AUTO button 1 FTB button
DME V (DME monitor video): When this
DME K (DME monitor key): When this
c AUTO button
When this button is pressed, the M/E or
PGM/PST bank preview signal selected on
the edit preview bus is automatically
switched to the program signal depending
on the on-air status.
2 Preview selection buttons
PVW, M/E-3 K-PVW, P/P K-PVW) of
the M/E or PGM/PST bank
corresponding to the pressed button is
selected on the edit preview bus.
button is pressed, the DME monitor
output video signal (DME MON V) is
selected on the edit preview bus.
button is pressed, the DME monitor
output key signal (DME MON K) is
selected on the edit preview bus.