Sony CCP-8000 Series User Manual page 385

memory are saved automatically when the frame memory selection is
changed.
• For the following signal formats, a field freeze is not possible.
Saving a processed freeze image
To save a processed freeze image as a file, in the Still >Composite menu use
the following procedure.
1
2
3
Selecting the way in which images are combined
To select the way in which the background image and input signal are
combined (see page 381), use the following procedure.
1
2
384
Still Image Operations
1080PsF/23.976, 1080PsF/24, 1080PsF/25, 1080PsF/29.97, 720P/50,
720P/59.94
Press [Store].
The keyboard window appears.
In the keyboard window, enter the file name (maximum eight characters).
In the keyboard window press [Enter].
This saves the freeze image as a still image file in memory.
The destination folder is the folder selected in step 4 of "Combining the
background image and input signal" (page 382).
If the entered folder name already exists, a message to confirm overwriting
appears.
In the <Type> group of the Still >Composite menu, select one of the
following methods of combination.
• Pattern Key: pattern key
• Ext Key: external key
(This can only be selected when the pair mode is enabled. The signal
selected on the frame memory source 2 bus is used as the key signal.)
• Mix: mix
• Nam: non-additive mix
If none of the above is selected, image combination is not carried out.
Depending on the selection in step 1, set the following parameters.
• When [Pattern Key] is selected
Knob Parameter Adjustment
1 Size Size of pattern
2 Soft Edge softness of pattern
Setting values
0.00 to 100.00
0.00 to 100.00